Wiki

Types of aquarium algae: which one is it, and what causes it?

Match colour and shape. Fine green haze on glass is green dust, hard green dots are green spot, black tufts are black beard, brown dust is diatoms, and slimy blue-green sheets are cyanobacteria. Nearly all algae point to light, nutrients, CO₂ or flow out of balance.

Updated · Scape Eden

Name it first, then fix it

Algae is not one problem. Each kind grows for a different reason, so the fix for one can do nothing for another, or even make it worse. Spend a minute on identification before you scrub, dose or add livestock. Look at the colour, how it feels and where it grows, then match it below. Our problem guides go deeper on each one.

Strictly, one item here is not algae: blue-green "algae" is a bacterium, and it needs different care. The rest are true algae, and almost all of them come back to the same few causes, covered further down.

Quick identifier: colour and shape

Each type: look, usual cause, first fix

The first four are the common ones on glass and leaves. Where sources disagree on the exact trigger, the entry says so.

  • Green dust algae: A thin green film on smooth glass that wipes off but returns fast. It often shows in a young tank that has not settled, but sources disagree on the trigger; low CO₂ and low nutrients are named by several. First fix: leave one pane unwiped for about 3 weeks so the algae finishes its life cycle and dies out, and keep wiping the others. Guide: green dust algae.
  • Green spot algae: Round, hard dots that need a blade to remove. Most sources name phosphate that runs low, sometimes with strong light or low CO₂. First fix: scrape the glass, trim badly spotted leaves and make sure phosphate never runs out. Guide: green spot algae.
  • Hair algae: Long, fine strands on plants, wood and filter outlets. Sources link it to too much light, low CO₂ and unbalanced nutrients. First fix: twirl the strands out on a toothbrush, shorten the light period and keep CO₂ steady. Guide: hair algae.
  • Black beard algae: Short dark tufts on leaf edges, wood and filter pipes. Most hobby guides tie it to low or swinging CO₂ (Wikipedia instead names nitrates, phosphates or iron), and sources disagree on flow. First fix: start CO₂ an hour or two before the light so it is steady when the light comes on, and pick the tufts off by hand. Guide: black beard algae.
  • Staghorn algae: Stiff, branching grey-green tufts, often beside black beard. Sources name low or unsteady CO₂, weak flow and nutrient imbalance. First fix: trim the tufts away and steady the CO₂. Guide: staghorn algae.
  • Brown algae (diatoms): A soft brown dust that wipes off, mostly in the first weeks of a tank, often linked to silicate in the tap water or soil while the plants are still small. First fix: wipe, siphon the dust and wait; it usually fades as the tank matures. Guide: brown algae (diatoms).
  • Blue-green algae (cyanobacteria): A slimy sheet that peels off easily. Sources link it to weak flow, built-up dirt, strong or long light and low nitrate. First fix: siphon out the mats, vacuum the soil, remove dead spots in the flow, then consider a blackout of about 3 days. Guides: blue-green algae and dead spots in flow.
  • Green water: Free-floating single-celled algae. Sources name too much light (including direct sun), overfeeding or nutrient surges, and new setups. First fix: block the sun, cut feeding and fit a UV steriliser. Guide: green water.
  • Spirogyra and cladophora: Both are green threads. Spirogyra is slimy and bright, and sources link it to strong or long light and nutrient surges. Cladophora is coarse and usually arrives on new plants or hardscape. For both, start by pulling out what you can by hand. Guides: spirogyra and cladophora.
  • Fuzz algae: Very short light-green fuzz. A little is normal, but more points to low or unsteady CO₂ or unbalanced nutrients, often in a young tank. Check that CO₂ is at full strength before the light starts and that fertiliser is regular. Guide: fuzz algae.

What all algae have in common

Nearly all algae come back to the same few causes: too much or too long light, unbalanced nutrients, unsteady CO₂, poor flow and a young or dirty tank. A dense planting also uses the nutrients first. The full prevention plan, with routines, plants and what to change first, is in how to stop algae in a planted tank.

What not to do and algae eaters

Do not rely on a blackout, algaecides or antibiotics, do not chase zero phosphate and do not raise the light without raising CO₂ and nutrients too. Cleaners such as the Siamese algae eater (one of few fish that eat black beard algae) and the Amano shrimp (shreds hair algae) only help once the cause is fixed. The details, blackout lengths and a longer helper list are in how to stop algae in a planted tank.

Still unsure?

If your algae does not match any entry, or two types grow together (black beard with green spot is common), treat the one that grows fastest first and fix the shared cause. Browse the whole problems index or the other guides, and check too little light in case you are fighting both algae and weak plants.

Keep reading

Sources

We read these pages and wrote the guide in our own words. Species, problem and tool details come from our own wiki pages linked above.

How we made this

Written with AI assistance from the sources listed here and checked against them. Not yet reviewed by an expert. Report a mistake · How we write and check pages