Wiki

Aquascaping for beginners: how to start a planted tank

To start a planted tank: choose your equipment, lay hardscape and substrate, fill slowly, plant densely on day one, keep the light to about 6 hours, change water often and add fish only once the tank has cycled, at least 3 to 4 weeks in.

Updated · Scape Eden

Decide the plan before you buy anything

Decide three things first.

  1. Tank size. Work out the volume with the tank volume calculator, and check the tank and stand fit the room. Keep the tank out of direct sun, which is a common trigger for green water.
  2. Low-tech or CO₂. Plants fall into easy and demanding groups. Easy plants grow without added CO₂, while plants such as HC Cuba, Glossostigma and Rotala macrandra need strong light and injected CO₂. Pick plants for the equipment you have, or plan CO₂ from the start. The no-CO₂ guide covers the simple route.
  3. A short plant list. A few well-matched plants beat many different ones with different needs (see too many plant species). The plant finder filters plants by light, CO₂ and difficulty.

What equipment you need

  • A tank and stand that can carry the full weight of water and substrate.
  • A filter with gentle flow. Bacteria in the filter handle waste, so plan for the cycling step.
  • A heater for tropical livestock, if your room is cool.
  • A light chosen for the water depth, not only the tank length. Light fades quickly in water, and fittings are usually sized for about 35 to 45 cm of depth, so a tall tank needs a much stronger light (see too little light). Put the light on a timer.
  • A substrate suited to your plants, such as plant soil or sand. The substrate calculator estimates how much you need.
  • Water conditioner for chlorine and chloramine, and a test kit for ammonia, nitrite and nitrate.

Step by step: setting up the tank

  1. Rinse the tank with plain water, with no soap or detergent. Place and level it before filling.
  2. Lay the hardscape (stones and wood) in the dry tank first. Rearrange until the layout looks good, and make sure nothing rocks. Unstable stacks are a known cause of falling hardscape.
  3. Add the substrate. Rich aquasoil often releases ammonia in its first weeks, so plan extra water changes in week one.
  4. Fill slowly. Pour onto a plate or through a sieve to break the jet so the substrate and plants stay in place. Check for anything that moved as you go.
  5. Plant: remove plant pots and stone wool, trim long roots and split clumps into smaller plants. Plant stems close together and spread carpet plants across the whole foreground in one go. Tie epiphytes such as Java fern and Anubias to wood or rock rather than burying them.
  6. Fill to the top, treat the water, and start the filter, heater and light. Set the light timer to 6 hours.

Plant densely from day one

Bare substrate and a bright light grow algae. Healthy plants use the nutrients that algae would otherwise take, so a heavily planted new tank is more stable. Plant fast-growing stem plants and floating plants from the start, and add slower plants for the long term. Fast growers such as water wisteria, hornwort and guppy grass can stay or be removed later once the tank is balanced.

Cheap fast plants are a good filler while slower, more expensive plants settle in (see too few plants at the start).

The first month

  • Light: start at 6 hours a day for the first 2 to 3 weeks, then increase slowly toward about 8 hours if no algae shows. Tropica allows 8 to 10 hours later, but longer days feed algae more easily.
  • Water changes: change 25 to 50% of the water once or twice a week for the first 3 to 4 weeks, then about 20 to 25% once a week. Use treated, temperature-matched water.
  • Fertiliser: use little or none at first, since new plants carry nutrients from the nursery. Add gently once you see new growth.
  • Filter: leave it running and do not clean it. Bacteria are growing on every surface.
  • No fish yet. Test ammonia and nitrite, and follow the cycling guide.
  • Algae: a brown dusty film (diatoms) in the first 2 to 6 weeks is normal and fades as plants grow in. Wipe the glass and wait; see brown algae. Do not add fertiliser to try to fix it.

Expect some plants to melt after planting. Cryptocorynes often drop their old leaves within days and regrow from the base, and this is a stress reaction rather than a disease (see crypt melt).

A simple week-by-week plan

  • Day 1: set up, plant densely, light on for 6 hours, filter running.
  • Weeks 1 to 2: change 25 to 50% of the water once or twice a week, no fish, little or no fertiliser. Brown dust may appear.
  • Weeks 3 to 4: keep the light at 6 hours, or raise it slowly if the plants are growing well. Test ammonia and nitrite and look for the cycle to finish.
  • Week 4 onwards: add hardy animals in small batches, move to one water change of about 20 to 25% a week, and begin gentle fertiliser once you see new growth.

This follows the pattern in published start-up guides. Your own tank may take longer, so let the test results decide when to move on.

Where plants go

Put the tallest plants at the back and leave light gaps for the front. Check each plant's full-grown height against your tank before you buy, because some plants grow taller or wider than the tank allows and shade the rest. Tie slow epiphytes to the hardscape, put rosettes in the middle, and keep low plants at the front. Repeat the same plant in more than one spot to tie the layout together.

Adding fish and shrimp

Add animals only after ammonia and nitrite both read zero. Start-up guides suggest waiting at least 3 to 4 weeks, and a slow cycle takes longer. Then stock in small batches, a few days to two weeks apart.

Beginner-friendly plants

These grow without added CO₂ and are rated easy in our records. Pick a handful, not all of them.

  • Java fern: attach to wood or rock; never bury the rhizome.
  • Anubias nana: slow, small and tough; keep the rhizome above the substrate.
  • Wendt's crypt: a good first rosette that grows in low light.
  • Singapore moss: forms flat mats on wood or rock.
  • Amazon frogbit: a floating plant for calm water that shades the tank; net out the extra and bin it, never tip it into drains or waterways, as it is invasive in many places.

Common mistakes

Keeping it going

After the first month, keep a weekly water change of about 20 to 25%, wipe the glass, and trim little and often. Aquasoil food runs low over time, and the pace varies by brand and plant load, so watch for yellowing rooted plants and plan for root tabs and a gentle fertiliser increase (see worn-out soil). Everything on this page is a starting point: plants, water and light differ in every home. When something goes wrong, use the problem finder or browse the plant guides.

Keep reading

Sources

We read these pages and wrote the guide in our own words. Species, problem and tool details come from our own wiki pages linked above.

How we made this

Written with AI assistance from the sources listed here and checked against them. Not yet reviewed by an expert. Report a mistake · How we write and check pages