Well water problems
Well water comes straight from the ground and is not treated for you, so it can be hard, short of oxygen, or carry gas, metals or nitrate. It is rarely an emergency, but the only way to know what you have is to test it.
Mostly a looks problem. Fix it steadily.
What you see
- A rotten egg smell from the water as it comes out of the supply
- Rust-coloured stains on taps, sinks or laundry
- Test kit readings for KH, GH or nitrate that are high straight from the supply
- Fish gasping, or plants doing worse, soon after a water change
- Different readings from a neighbour's well, even a close one
Could it be something else?
- Rotten egg smell inside the tank: A rotten egg smell can also come from inside the tank; this page is about the supply water itself
- A pH that swings in the tank: Swings come from low KH and CO₂, not from the source water itself
- Chlorine or chloramine in tap water: That is added by a water supplier; well water is not treated unless you treat it
Why it happens
- Hard, well-buffered waterHardness is mostly calcium and magnesium, and alkalinity (KH) is mostly carbonate and bicarbonate. Groundwater can carry plenty of both. Soft-water fish such as the green neon tetra come from water with almost no carbonate hardness, so hard water may not suit them.
- Little oxygen and extra gasWater from wells or springs is often short of dissolved oxygen, and can hold extra CO₂ or hydrogen sulfide, the rotten egg gas. Low oxygen is a leading cause of fish deaths in fish farming.
- Iron and manganeseMetals dissolved from the rock. Stained taps and laundry point to iron or manganese. Plants do need some iron, so test the supply before adding more iron fertiliser.
- Nitrate or other pollution from the landWells near farms or septic systems can carry nitrate and other contaminants. Nitrate in your supply adds to what your tank already makes.
- A supply that differs from your neighbour'sEven wells that are close together can have quite different water, so advice for someone else's well may not suit yours.
Fix it now
Safety first: if a step uses a medicine, treatment or salt, follow the product label and never go above the labelled dose. Check the label for animals it can harm, such as shrimp, snails and scaleless fish, and for whether to remove carbon. If you are unsure, or animals keep dying, ask an aquatic vet.
- Test the supply water itself, not only the tank: KH, GH, pH and nitrate, and write the numbers down
- Stained fixtures or laundry point to iron or manganese, and a rotten egg smell to hydrogen sulfide, so ask a certified lab to test for them; if you keep shrimp or snails, ask for copper too
- Let the new water stand in a clean bucket with an air stone running before use, so it takes up oxygen, and test again before it goes in the tank
- Compare your KH and GH with what your fish and plants want before you change anything
- If the water is much harder than your livestock want, mix it with low-mineral water such as RO and test each mix
- Change water in small, regular amounts so hardness and pH do not jump
Stop it coming back
- Test the supply for nitrate and pH at least once a year, and again after flooding, nearby building work, well repairs, or a change in smell, colour or taste
- Keep a written log of supply readings so you can spot changes
- Choose plants and fish that suit your water, or plan on RO for the ones that do not
- Test KH and nitrate in the tank as well as in the supply
Common questions
- Could bad well water be what is causing my plant problems?
- It can be. Well water can be hard, short of oxygen, or carry iron, gas or nitrate. Test the supply for KH, GH, pH and nitrate before you change anything else, and check that your plants suit your water.
- What is the best strategy for dealing with well water?
- Test it first, then decide. Let it stand with an air stone running before use, change water in small amounts, and mix with RO water if it is harder than your fish and plants want. Test each mix.
- Is well water safe for an aquarium?
- Often it can be used, but nobody treats it for you, so it can be short of oxygen or carry gas, metals or nitrate. Test it. A hobby test kit does not show whether water is safe to drink; use a certified lab for that.
- Why does my well water smell of rotten eggs?
- That smell points to hydrogen sulfide, a gas found in some well water. Have the water tested by a certified lab, and tell them about the smell, because the gas can be missed in samples sent by post.
Still stuck?
Describe the problem and share a photo in the WhatsApp community group. Other keepers can often spot what is wrong.
Sources
- SRAC 4606: Interpretation of Water Analysis Reports for Fish Culture (well and spring water, gases, metals, alkalinity, hardness)
- US EPA: Protect your home's water (private wells; testing, certified labs, stains and smells)
- Tropica: fertiliser and CO₂ (iron as a plant nutrient, KH)
- Seriously Fish: Paracheirodon simulans (water almost without carbonate hardness)
How we made this
Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages
Cite this page
Copy a ready-made line to credit this page in your own writing.
Citation
Scape Eden. “Well water in an aquarium: problems and tests”. Scape Eden aquarium wiki, updated October 15, 2026. https://scapeeden.com/wiki/problems/well-water-problems
Reference style (APA)
Scape Eden. (2026, October 15). Well water in an aquarium: problems and tests. Scape Eden. https://scapeeden.com/wiki/problems/well-water-problems
Plain link
https://scapeeden.com/wiki/problems/well-water-problems
Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.
