High TDS in the tank: does it matter?
A TDS meter estimates how much dissolved material is in the water from its electrical conductivity. A high number alone is not a diagnosis, because the meter cannot tell which dissolved ions are present.
Mostly a looks problem. Fix it steadily.
What you see
- A TDS meter reads much higher than you expected
- The reading is higher in the tank than in fresh tap water
- The reading creeps up between water changes
- The reading jumps after you dose fertiliser or add minerals
Could it be something else?
- High nitrate: Nitrate has its own test kit; TDS counts every dissolved ion, nitrate included
- Failed moult: Shrimp can fail to moult in water they are not suited to, which a TDS number alone cannot show
Why it happens
- Your tap waterWater that is already mineral-rich reads high straight from the tap. Check a glass of fresh tap water first to get your baseline.
- Fertilisers and mineral additivesAnything that dissolves into ions raises the reading, fertiliser salts and mineral additives included. A high reading from them is not a fault in itself.
- Build-up between water changesWhen water evaporates, the dissolved material stays behind, so the reading creeps up. Waste products also add dissolved ions.
- A meter limitationThe meter measures conductivity and multiplies it by a conversion factor to show a TDS number. Ions differ in how well they conduct, so the right factor changes from one water to another, and the same meter can give a different number for water with the same total dissolved material.
Fix it now
Safety first: if a step uses a medicine, treatment or salt, follow the product label and never go above the labelled dose. Check the label for animals it can harm, such as shrimp, snails and scaleless fish, and for whether to remove carbon. If you are unsure, or animals keep dying, ask an aquatic vet.
- Measure fresh tap water with the same meter and compare it with the tank water, to see if the tank is adding anything
- Check what the species you keep need: each species has a range it does best in, and the reading only matters if it takes the water outside that range
- If the reading is clearly rising, test ammonia, nitrite and nitrate too, since waste also adds dissolved ions
- If it rises between water changes, change water more often
- If your tap water is very mineral-rich, you can dilute it with softer water such as RO water, if your species suit it
- Top up evaporated water with plain treated water, not with water that already has minerals in it
Stop it coming back
- Note the tap-water reading and the tank reading each week so you can see a trend
- Keep up regular water changes
- Add fertiliser and minerals by the label, not in extra amounts
- Choose livestock that suits your tap water instead of changing the water
Common questions
- Do I need a TDS meter?
- Not to keep a tank healthy. It can show a change over time, but it only gives a total and cannot show which ions are in the water.
- My TDS is very high. Is that bad?
- We found no reliable source with one safe or unsafe TDS number for aquarium fish. Each species has a range it does best in. Animals outside that range spend more energy coping, and if they are far outside it they can die. Check what your species need, and whether the reading is climbing.
- How do I lower TDS without lowering GH and KH?
- The meter counts every dissolved ion, and the minerals behind GH and KH are dissolved ions too. We found no source for removing only some of them, so assume that anything that lowers the total lowers them as well.
- Why do two meters or two places give different TDS numbers?
- A TDS meter measures conductivity and applies a conversion factor. Different ions conduct differently, so the factor changes from one water to another, and readings from different waters or meters cannot be compared reliably.
Still stuck?
Describe the problem and share a photo in the WhatsApp community group. Other keepers can often spot what is wrong.
Sources
How we made this
Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages
Cite this page
Copy a ready-made line to credit this page in your own writing.
Citation
Scape Eden. “High TDS in an aquarium: does it matter?”. Scape Eden aquarium wiki, updated October 15, 2026. https://scapeeden.com/wiki/problems/high-tds-reading
Reference style (APA)
Scape Eden. (2026, October 15). High TDS in an aquarium: does it matter?. Scape Eden. https://scapeeden.com/wiki/problems/high-tds-reading
Plain link
https://scapeeden.com/wiki/problems/high-tds-reading
Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.
