Wiki
Water problems

Hard water (high GH)

Also calledgh too highhow to lower ghhard tap water planted tankmix RO with tap waterhigh gh low khhigh tds tap water

GH (general hardness) mostly measures the calcium and magnesium dissolved in the water. Hard water is only a problem for soft-water plants and animals, and the fix is to dilute it with low-mineral water in small, regular steps, not to chase a quick change.

How urgentNot urgent

Mostly a looks problem. Fix it steadily.

What you see

  • A GH test that reads well above what your fish, shrimp or plants prefer
  • Soft-water plants such as Eriocaulon fade or struggle as the water hardens
  • A high KH as well, so the pH stays high for a given amount of CO₂
  • Soft-water fish that do not do as well as the species page says they should

Could it be something else?

  • pH crash and swings: That is too little KH, the opposite of this. GH and KH are measured separately and can differ
  • Soft or RO water: That is water with too few minerals, usually after RO is used without remineralising

Why it happens

  1. Hard source waterTap and well water carry whatever calcium and magnesium the ground gave them, and well water varies a lot from place to place. Test your own supply.
  2. Limestone-type hardscapeLimestone adds hardness and alkalinity as it dissolves. If GH keeps rising between water changes, check whether you have limestone-type rock in the tank.
  3. A mismatch with the livestock you choseHard water is a problem only for plants and animals that need soft water. For hardness-tolerant species it is not a problem at all.
Step by step

Fix it now

Safety first: if a step uses a medicine, treatment or salt, follow the product label and never go above the labelled dose. Check the label for animals it can harm, such as shrimp, snails and scaleless fish, and for whether to remove carbon. If you are unsure, or animals keep dying, ask an aquatic vet.

  1. Test GH and KH on your tap water and on the tank water with a liquid drop test kit, and write the numbers down
  2. Check what your fish, shrimp and plants actually need on their species page before changing anything
  3. If you need softer water, blend tap water with low-mineral water (RO or RO/DI) in a fixed ratio, test the blend, and adjust the ratio until GH reads what you want. Blending lowers KH as well, so test KH too
  4. Change the water in small, regular amounts rather than one big swap, so hardness and pH do not jump
  5. Take out limestone-type rock if your GH keeps rising between water changes
  6. If hard water is simply too much for the livestock you want, pick hardness-tolerant species instead of fighting the tap

Stop it coming back

  • Test your source water every so often, not only the tank, because supplies can change
  • Use the same blend ratio each time and test it before it goes in
  • Choose rock, plants and livestock that suit your water before you buy
  • Avoid big, sudden changes to hardness

Common questions

How do I lower GH in my tank?
Dilute it: mix your tap water with RO or RO/DI water, which has had almost all its minerals removed, and test the mix until GH reads what you want. Add the blend at small, regular water changes. We found no source for a safe way to remove calcium and magnesium inside the tank itself.
Can I mix RO water with tap water?
Yes, that is how you get softer water without remineralising. Test the blend each time, because tap water can change, and remember it lowers KH as well as GH.
Should I use a household water softener for my tank?
We do not recommend it. Salt-based softeners swap calcium and magnesium for sodium, so the water reads softer on a GH test but carries extra sodium. NDSU Extension advises against watering plants with softened water for this reason; it does not cover aquariums.
Do I need to lower GH at all?
Only if your livestock or plants need soft water. Check their species pages first.
Scape Eden community

Still stuck?

Describe the problem and share a photo in the WhatsApp community group. Other keepers can often spot what is wrong.

Sources

  1. SRAC 4606: Interpretation of Water Analysis Reports for Fish Culture (hardness is mainly calcium and magnesium; alkalinity buffers pH; limestone raises both)
  2. NDSU Extension: Water Softening (Ion Exchange) (calcium and magnesium swapped for sodium; softened water not recommended for plants)
  3. Seriously Fish: Betta foerschi (RO unit for soft water; small, regular water changes)
  4. Tropica: fertiliser and CO₂ (carbonate hardness sets the pH for a given CO₂ level)

How we made this

Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages

Cite this page

Copy a ready-made line to credit this page in your own writing.

Citation

Scape Eden. “Hard water (high GH): how to lower it”. Scape Eden aquarium wiki, updated October 15, 2026. https://scapeeden.com/wiki/problems/hard-water-high-gh

Reference style (APA)

Scape Eden. (2026, October 15). Hard water (high GH): how to lower it. Scape Eden. https://scapeeden.com/wiki/problems/hard-water-high-gh

Plain link

https://scapeeden.com/wiki/problems/hard-water-high-gh

Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.