Wiki
Water problems

Power cuts: outage plan

Also calledpower outageload-sheddingblackoutfilter stoppedbattery air pump

When the power fails, the filter and surface movement stop, so oxygen falls while waste and CO₂ build up. In a warm or crowded tank this can harm fish quickly, so have a plan before it happens.

How urgentAct now

Fish or shrimp can die within hours or days.

What you see

  • The filter, air pump and lights are off
  • Fish gasp at the surface during or after the cut
  • A foul smell from the canister when power returns
  • Ammonia or nitrite rises in the days after a long cut

Could it be something else?

Why it happens

  1. No surface movementWith the filter and air pump off, oxygen stops coming in, and warm water has less to start with.
  2. Filter bacteria starved of oxygenBacteria in a still canister die off, and the canister can turn airless and foul inside.
  3. Waste released on restartSwitching a stagnant canister back on can send dead bacteria, trapped waste and toxins into the tank all at once.
  4. Night or heatAt night plants use oxygen too, and in hot rooms the water holds less of it.
Step by step

Fix it now

Safety first: if a step uses a medicine, treatment or salt, follow the product label and never go above the labelled dose. Check the label for animals it can harm, such as shrimp, snails and scaleless fish, and for whether to remove carbon. If you are unsure, or animals keep dying, ask an aquatic vet.

  1. Stop feeding
  2. Put a battery air pump and air stone in the tank; if you have none, stir the surface by hand
  3. Leave the lights off; oxygen matters far more than light
  4. If the canister sat off for more than a few hours, open it, drain the stagnant water and rinse the media gently in a bucket of tank water before restarting
  5. If it smells foul, flush the outflow into a bucket, or change water straight after restarting
  6. Test ammonia and nitrite over the next 48 hours and change water if either is above zero

Stop it coming back

  • Keep a charged, tested battery air pump for every tank
  • Run the filter and air pump from a small UPS; leave heaters and lights off it to stretch the runtime
  • Use a proper CO₂ solenoid, which shuts the gas off when the power fails
  • Add backup aeration on a heavily stocked tank if an outage lasts beyond 30–60 minutes
  • Plug equipment into a socket with earth-leakage (GFCI) protection
Scape Eden community

Still stuck?

Describe the problem and share a photo in the WhatsApp community group. Other keepers can often spot what is wrong.

Sources

  1. Bulk Reef Supply: UPS vs. DC battery backup
  2. UPS and pumps: Aquarium Advice Forum
  3. Aquatop BREZA battery air pump
  4. Aquarium Science: Anaerobic science

How we made this

Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages

Cite this page

Copy a ready-made line to credit this page in your own writing.

Citation

Scape Eden. “Aquarium power cut: what to do in an outage”. Scape Eden aquarium wiki, updated October 15, 2026. https://scapeeden.com/wiki/problems/power-cuts

Reference style (APA)

Scape Eden. (2026, October 15). Aquarium power cut: what to do in an outage. Scape Eden. https://scapeeden.com/wiki/problems/power-cuts

Plain link

https://scapeeden.com/wiki/problems/power-cuts

Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.