Wiki
Fish diseases

Mollies dying one by one

Also calledMollies keep dyingPregnant molly diedMolly bent spineDo mollies need a heaterMolly shimmiesguppies dying

When mollies die one after another, the cause is most often the water, the temperature or the health of the fish. It is urgent: more fish will die until you find the cause, so test the water today.

How urgentAct now

Fish or shrimp can die within hours or days.

What you see

  • One molly dies, then another a few days later
  • Fish sit on the bottom with fins clamped, or sway on the spot without swimming (shimmies)
  • Fish grow thin and weaken slowly over weeks; some develop a bent spine
  • Fish gasp at the surface or stay near the filter outlet
  • White spots, cotton-like patches or frayed fins appear before death

Could it be something else?

  • Fish TB: Slow wasting over weeks, often one fish at a time, while the water tests fine.
  • Ammonia spike: Several fish suddenly struggle at once, often in a new tank or after cleaning the filter; the test kit shows ammonia.
  • Internal worms or parasites: Thin fish that still eat, with long white or stringy droppings.

Why it happens

  1. Ammonia or nitrite in the waterFish waste turns into ammonia and nitrite, both toxic. A new filter takes about 6–8 weeks to handle it, and a tank with many fish can still overload an older filter, even with weekly water changes. A healthy tank reads zero for both.
  2. Water too soft or acidicMollies need hard, alkaline water: pH 7.0–8.5 and GH 15–30 dGH (sailfin mollies up to 35). In soft or acidic water they weaken, sway on the spot (shimmies), clamp their fins and catch diseases more easily.
  3. Cold or changing temperatureShort-fin and Yucatan mollies live at 21–28 °C, sailfin mollies at 21–26 °C. Cold water weakens a fish's defences, and white spot (ich) outbreaks often start when the temperature is changing, such as in spring and autumn.
  4. Too many fish or mixed water needsOvercrowding and poor water quality are common reasons behind disease and deaths. Mollies want hard water, while black widow tetras and angelfish prefer softer water around pH 6–7, so in a mixed tank one group lives outside its best range.
  5. Weak shop stock or fish TBSome farmed mollies, black mollies especially, are inbred and weak. Slow wasting fits fish TB (mycobacteriosis), while a lack of vitamin C can bend the spine. Only a laboratory test can confirm TB.
Step by step

Fix it now

Safety first: if a step uses a medicine, treatment or salt, follow the product label and never go above the labelled dose. Check the label for animals it can harm, such as shrimp, snails and scaleless fish, and for whether to remove carbon. If you are unsure, or animals keep dying, ask an aquatic vet.

  1. Test ammonia, nitrite, pH, GH and temperature today, before changing anything
  2. Take out any dead fish straight away
  3. If ammonia or nitrite shows at all, change part of the water with dechlorinated water at the same temperature, and feed very lightly until both read zero
  4. Bring the temperature into range (21–28 °C; 21–26 °C for sailfin mollies) and keep it steady: fit a heater with a thermostat if the room gets cooler than that or swings between day and night
  5. Move any thin, wasting fish to a separate tank, and wash your hands after touching the water
  6. If fish keep dying while every test reads normal, ask an aquatic vet; a lab test is the only way to confirm a bacterial infection or TB

Stop it coming back

  • Test the water every week, and at once when fish act differently
  • Keep mollies in hard, alkaline water and with fish that like the same water
  • Keep the temperature steady with a thermostat heater, and check it does not climb above 28 °C (26 °C for sailfin mollies) in hot weather
  • Do not crowd the tank; add new fish a few at a time
  • Quarantine new fish in a separate tank before they join the others

Common questions

Should I install a heater for my mollies?
Yes, if your room ever drops below about 21 °C or the temperature swings between day and night. Mollies live at about 21–28 °C (sailfin mollies 21–26 °C) and do best when it stays steady. A heater will not fix ammonia or soft water, so test the water first.
Do mollies need salt?
No. Mollies need hard, alkaline water, rich in calcium and magnesium. They can live in slightly salty water, but salt does not replace hardness.
Do mollies get weak from breeding too much?
We found no reliable source for this. If your mollies are young and not breeding, look at the water, temperature and stocking first.
Will methylene blue cure them?
Not if the cause is TB: no treatment is known to clear fish TB. The methylene blue label lists fungus and some outside infections only. It also harms the filter bacteria, and an overdose can kill plants and shrimp, so follow the label.
Do black widow tetras need a heater?
They live at 20–26 °C, so a heater is needed when the room drops below 20 °C. They also prefer softer, slightly acidic to neutral water (pH 6–7), which is the opposite of what mollies need.
Why are my guppies dying when my shrimp and snails are fine?
Healthy shrimp and snails do not rule out a water problem for fish, so test ammonia and nitrite today. Ammonia damages fish gills, and sudden temperature changes weaken fish and can make infections worse. Many commercially bred guppies are also weakened by inbreeding and are prone to disease and early death, so buy from a good breeder.
What is guppy shimmy, and how do I stop it?
Shimmy is a fish swaying or shaking on the spot, often with clamped fins. It is a sign, not a disease. We found no veterinary source on its cause, so check the likely culprits: ammonia or nitrite, a temperature that is changing or too cold, and water outside the guppy range of pH 7.0 to 8.5 and 8 to 30 dGH.
Why is my platy hiding or acting weird?
First test the water and temperature. Platies do best at about 20 to 26 °C, pH 7.0 to 8.2 and 10 to 30 dGH. Males can chase females non-stop, so keep several females for each male and add dense plants for cover.
Can guppies, mollies and platies share one tank?
They can share water: the overlap is about pH 7.0 to 8.2, 15 to 30 dGH and 21 to 26 °C, which sits inside each species' range. Soft or acidic water suits none of them for long. Do not crowd the tank, because overstocking lowers the oxygen in the water.
Scape Eden community

Still stuck?

Describe the problem and share a photo in the WhatsApp community group. Other keepers can often spot what is wrong.

Sources

  1. Seriously Fish: Poecilia sphenops
  2. Seriously Fish: Poecilia latipinna
  3. Seriously Fish: Poecilia velifera
  4. Seriously Fish: Gymnocorymbus ternetzi
  5. UF/IFAS FA031: Ammonia in aquatic systems
  6. UF/IFAS FA006: Ichthyophthirius multifiliis (white spot) infections in fish
  7. Merck Veterinary Manual: Disorders and diseases of fish
  8. Merck Veterinary Manual: Bacterial diseases of fish
  9. Abram et al. 2017, Impacts of low temperature on the teleost immune system
  10. NT Labs: Aquarium Methylene Blue (label)
  11. Seriously Fish: Pterophyllum scalare
  12. SRAC 4706: Mycobacterial infections of fish

How we made this

Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages

Cite this page

Copy a ready-made line to credit this page in your own writing.

Citation

Scape Eden. “Mollies dying one by one: causes and fixes”. Scape Eden aquarium wiki, updated October 15, 2026. https://scapeeden.com/wiki/problems/mollies-dying

Reference style (APA)

Scape Eden. (2026, October 15). Mollies dying one by one: causes and fixes. Scape Eden. https://scapeeden.com/wiki/problems/mollies-dying

Plain link

https://scapeeden.com/wiki/problems/mollies-dying

Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.