Wiki
Shrimp and snails

Fish or shrimp dying after a water change

Also calledshrimp died after water changefish died after water changecorys died water changeshrimp deaths after cleaningafraid to change water shrimpdying after disturbing the substrate

Fish, shrimp or bottom-dwellers that gasp, hide or die within hours or days of a water change or tank clean. It is urgent, because the cause is usually in the new water or in what you stirred up, and shrimp are hit hardest.

How urgentAct now

Fish or shrimp can die within hours or days.

What you see

  • Shrimp, snails or corydoras dying within a day of a water change
  • Fish gasping, racing around or lying on the bottom soon after new water goes in
  • Shrimp stuck half out of their shell after the change
  • Deaths after you dug into the substrate, moved wood or rinsed the filter
  • A tank that did fine for months and then crashed after one big clean

Could it be something else?

  • Old tank syndrome: The tank had gone months without water changes and one large change shocked the fish
  • Chlorine and chloramine: Gasping starts right after new water that was not treated
  • Failed moult: Shrimp die stuck in their old shell, usually after a swing in water minerals
  • Sudden shrimp deaths: Many shrimp die with no link to a water change, often from copper, spray or zinc

Why it happens

  1. Untreated or wrongly treated tap waterMany water suppliers add chlorine and ammonia, which form chloramine, a compound very toxic to fish and other water animals. It stays in water much longer than plain chlorine, so letting a bucket stand is not a safe plan. Use a conditioner that says it removes chloramine, every time.
  2. New water very different from tank waterLarge differences in temperature or minerals between the new water and the tank water are likely to stress shrimp and sensitive fish such as corydoras. We found no authoritative source measuring this, so match new water to the tank as closely as you can.
  3. A big change in a tank that has gone too longIn a tank that goes a long time without water changes, alkalinity (the water's buffer) can run out and the pH can then fall quickly, killing fish. This is called old tank syndrome. A large change in such a tank swings the water all at once.
  4. Waste stirred up from the substrateDigging into old substrate or moving wood may stir waste into the water, and rotting waste adds ammonia. Ammonia in its toxic form rises as pH and temperature rise, so the same reading is more dangerous in warm, high-pH water.
  5. A poison on the tools or in the new waterCopper, soap or spray residue on buckets, hoses or hands can reach the tank. Copper is toxic to freshwater shrimp, and in a lab study it was less harmful in water with higher alkalinity, so soft water carries more risk.
  6. Filter media rinsed in tap waterChlorine is used to kill bacteria, so rinsing filter media in untreated tap water can harm the bacteria that remove ammonia, and ammonia may then climb over the next days.
Step by step

Fix it now

Safety first: if a step uses a medicine, treatment or salt, follow the product label and never go above the labelled dose. Check the label for animals it can harm, such as shrimp, snails and scaleless fish, and for whether to remove carbon. If you are unsure, or animals keep dying, ask an aquatic vet.

  1. Stop making large water changes and check how you treated the last batch of new water
  2. Treat the tank water with a conditioner that is labelled for chloramine, following the label, if there is any doubt that the new water was treated
  3. Test ammonia, nitrite, pH and temperature, and test GH and TDS in both the tank and your tap water so you can compare them
  4. Add an air stone or turn up surface movement so the water carries plenty of oxygen
  5. If you suspect copper, soap or spray, do small partial changes with conditioned water matched to the tank in temperature and minerals, and wash the tools with plain water only
  6. Remove dead animals quickly
  7. Ask an aquatic vet if fish keep dying and the water tests look fine

Stop it coming back

  • Treat every drop of tap water that goes in the tank, including top-up water, with a conditioner suited to your supply
  • Match the temperature of new water to the tank, and match hardness and TDS closely if you keep shrimp
  • Change small amounts often rather than a large amount rarely
  • Rinse filter media only in water taken from the tank
  • Disturb the substrate one small patch at a time and keep buckets, hoses and tools for aquarium use only

Common questions

Why did my shrimp die after a water change?
The most common causes are untreated tap water, new water that differs a lot from the tank in temperature or minerals, and a poison on the bucket or hose. Shrimp are more sensitive than fish, so they show it first. Change a little water at a time and match it to the tank.
I am afraid to do water changes. What is the safe way?
Small changes are the safest way, with every drop treated and matched in temperature. Skipping changes is risky too: in a tank left too long, the water's buffer can run out and the pH can crash.
Why did my corys and plecos die after a water change?
Check for untreated chloramine first, then for a swing in temperature or pH, then for ammonia stirred up from the substrate. Test the water and compare tap and tank readings.
Can disturbing the substrate kill my fish or shrimp?
It may. Stirring old substrate can put waste into the water and raise ammonia, so clean it in small patches and keep the water moving at the surface.
How often should I change the water, and how much?
We found no authoritative source that gives one schedule for every tank. The amount depends on how many fish you keep and how much you feed, so use your nitrate test as the guide: if it climbs between changes, change more or more often. In our reasoning, small regular changes with treated water matched to the tank are gentler than rare big ones.
Is a 100% water change safe?
We found no reliable source that sets a safe or unsafe percentage. The sourced danger is untreated water: chlorine and chloramine are harmful to fish (US EPA). In our reasoning, a big gap in temperature, pH or hardness between new and old water adds stress, and a tank left a long time without changes is the riskiest, because its buffer (alkalinity) may be used up and one large change swings the water all at once. A series of smaller changes over several days is the gentler way to get the same result.
How many water changes are allowed? Can I change water too often?
We found no source giving a limit. In our reasoning, frequent changes are not harmful in themselves as long as every batch is treated for chlorine and chloramine and matched to the tank's temperature; the problems come from untreated or very different water, not from the number of changes.
I've run out of dechlorinator. Can I let the water stand?
Only if your supplier uses plain chlorine, which eventually leaves water that sits. Chloramine, a mix of chlorine and ammonia, does not leave by standing, and boiling and reverse osmosis do not remove it either (US EPA). Ask your supplier which one you have. If it is chloramine, a product made to remove chloramine, or a carbon filter with high-quality granular activated carbon, are the options (City of Hagerstown), and ammonia is released as chloramine is removed. Do not add untreated water to a tank with fish in it.
Can I just aerate tap water instead of using dechlorinator?
A UF/IFAS classroom exercise aerates chlorinated water for 24 hours and expects chlorine to fall to a greatly reduced level, if not zero. For chloramine it expects a greatly reduced amount that will probably not be zero. Test with a total chlorine kit, not a free chlorine kit, before the water goes in (City of Hagerstown), and treat aeration as a back-up, not a routine.
Scape Eden community

Still stuck?

Describe the problem and share a photo in the WhatsApp community group. Other keepers can often spot what is wrong.

Sources

  1. UF/IFAS: Chlorine, friend or foe? (FA171)
  2. UF/IFAS: Ammonia in Aquatic Systems (FA031)
  3. Daly et al. (1990), Copper toxicity to Paratya australiensis: influence of bicarbonate and ionic strength

How we made this

Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages

Cite this page

Copy a ready-made line to credit this page in your own writing.

Citation

Scape Eden. “Fish or shrimp dying after a water change”. Scape Eden aquarium wiki, updated October 15, 2026. https://scapeeden.com/wiki/problems/deaths-after-water-change

Reference style (APA)

Scape Eden. (2026, October 15). Fish or shrimp dying after a water change. Scape Eden. https://scapeeden.com/wiki/problems/deaths-after-water-change

Plain link

https://scapeeden.com/wiki/problems/deaths-after-water-change

Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.