Shrimp, fry or fish sucked into or stuck in the filter
Small animals can be pulled into a filter intake or get into its hoses and body. A fine guard over the intake is the usual fix, but the guard has to be kept clean or it will choke the filter.
Not an emergency, but it gets worse if left.
What you see
- A shrimp, small fish or loach you cannot find in the tank
- An animal pinned against the intake strainer or hanging out of an intake slot
- A dead or injured animal in the intake, hose or filter media when you clean it
- Baby shrimp or fry gone missing after you add a new filter or move the intake
- A small, burrowing fish found in the filter body or behind the media
Could it be something else?
- Jumping out of the tank: Fish that jump are found dry on the floor or behind the tank, not in the filter
- Sudden shrimp deaths: Many shrimp die together with no sign of a filter problem, usually pointing to the water
- Crash after cleaning the filter: Ammonia or nitrite rises after you clean the filter, not animals going missing
Why it happens
- An open intake strainerFluval and Eheim both fit a strainer or suction basket on the intake, and neither manual presents it as protection for baby animals. Dennerle, a maker of aquarium equipment, sells a clip-on guard that it says stops newly hatched shrimp larvae, baby shrimp and small fish being sucked into the filter, so an unguarded intake is a risk for the smallest animals.
- Species that squeeze into gaps and hideSeriously Fish says small kuhli loaches must not be able to enter filter intakes, and that this fish digs and can spend time completely buried. Keep the intake covered for loaches and other small bottom-dwellers.
- Suction that is strong for a small bodySeriously Fish advises gentle filtration with a little surface movement for kuhli loaches and says high flow rates are best avoided. We found no source on the suction strength of intakes, so choose a gentle flow and a guard rather than relying on a number.
- Gaps at the filter or lidSeriously Fish says the kuhli loach is known to jump and needs a tight-fitting lid, and that most loaches jump at times, especially in a new tank. A loose lid or open gaps around hoses and cables let small animals escape.
Fix it now
- Unplug the filter at the wall before you touch the intake, hoses or filter, and keep plugs and sockets dry
- Look at the intake strainer first. If an animal is pinned or stuck, free it gently with the filter off, and keep it in a bucket of tank water while you check it for injuries
- Open the hoses and filter body if you cannot find a missing animal, and rinse the media in a bucket of tank water so you can check the bucket before you tip it out
- Fit a fine guard over the intake that fits snugly, such as a foam sleeve or the maker's own guard, so nothing can reach the slots. As one example, Dennerle's clip-on guard for its corner filter uses a sponge with pores of about 0.5 mm (single source)
- Check the guard often and rinse it gently in a bucket of tank water, since a clogged guard cuts the flow. See our guide on canister filters with weak flow if the flow drops
- Keep a tight lid on the tank, and block the gaps around hoses and cables, for loaches and other escape artists
- Watch any animal you freed for injuries, hiding or not eating over the next days. Ask an aquatic vet if it gets worse
Stop it coming back
- Cover every intake before you add small shrimp, fry or loaches
- Choose a gentle filter flow for small animals, and do not point the intake at where they like to hide
- Rinse intake guards gently in tank water on a regular basis, and check them for trapped baby animals first
- Keep a tight lid, and check hose and cable gaps
- Look into the bucket before you tip out water from cleaning a filter
Common questions
- How do I shrimp-proof my filter intake?
- Cover the intake with a fine guard that fits snugly, and clean it often. Dennerle, a maker of aquarium equipment, sells a clip-on guard with pores of about 0.5 mm for its corner filter, to protect newly hatched shrimp larvae. We found no test showing any guard stops every shrimp.
- My kuhli loach is in the filter. Can I stop it happening again?
- Cover the intake so the loach cannot get in, and keep the tank lid tight. Seriously Fish says small specimens must not be able to enter filter intakes, and that gentle filtration with high flow avoided suits this fish.
- How do I clean a sponge filter without killing baby shrimp?
- Rinse the sponge gently in a bucket of tank water, not hard under running water, and look in the bucket for babies before you tip it out. Aquarium Science found that swishing a filter in a bucket removes far less beneficial bacteria than squeezing it under a running tap. It says nothing on baby shrimp, and we found no source on saving them.
- Can apple snails be hurt by filter intakes?
- We found no reliable source on apple snails and filter intakes. The same steps apply: fit a snug guard over the intake and check it often.
Still stuck?
Describe the problem and share a photo in the WhatsApp community group. Other keepers can often spot what is wrong.
Sources
How we made this
Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages
Cite this page
Copy a ready-made line to credit this page in your own writing.
Citation
Scape Eden. “Shrimp or fish stuck in the filter: how to stop it”. Scape Eden aquarium wiki, updated October 15, 2026. https://scapeeden.com/wiki/problems/animals-sucked-into-filter
Reference style (APA)
Scape Eden. (2026, October 15). Shrimp or fish stuck in the filter: how to stop it. Scape Eden. https://scapeeden.com/wiki/problems/animals-sucked-into-filter
Plain link
https://scapeeden.com/wiki/problems/animals-sucked-into-filter
Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.
