Wiki
Water fern (Azolla filiculoides)
Photo: Len WorthingtonCC BY-SA 2.0 · Wikimedia Commons
Floating plant

Azolla filiculoides

  1. GroupFern
  2. OrderSalviniales
  3. GenusAzolla
Also calledWater fernMosquito fern

Also known as Azolla arbuscula (older scientific name)

Azolla filiculoides is an easy free-floating fern; each plant is 1-2 cm across. It is green with edges tinged pink, orange or red, and turns red in strong light. It hosts nitrogen-fixing Anabaena azollae in leaf pockets, so it fixes its own nitrogen from the air. It grows very fast and is hard to clear once established.

Good to know: Can be invasive; never release it into ponds or waterways.
Temperature15–30 °C
pH6–7.5
LightHigh
CO₂Not needed
DifficultyEasy

How it grows

Growth
Fast
CO₂
Not needed
Light
High or brighter
Colour
Green, turning red in strong light
  • Give it strong light for the red colour.
  • Keep it to 50-70% of the surface and net out the extra every week.
  • A floating ring holds it in one area and away from the filter intake.

How to multiply it

Fragmentation

Will it grow in my water?

Type your own readings, or compare typical tap water from a few cities. The yellow pin is your water; the striped band is where it survives, the solid band is its comfort zone.

Temperature
15–30 °C · best 18–30 °C
Survives 15–30 °CComfort 18–30 °Cest.
Good25 °C
pH
6–7.5 · tolerated range
GoodpH 7.0
KH
keeps pH steady · 0–12 dKHest.
Good4 dKH
Good

Good fit for your water

All readings sit inside its range.

Type your own readings from a test kit. Guidance, not a guarantee.

Where it can live

  • Floating

    Yes

  • Pond

    Yesest.

  • Frost

    Takes light frostest.

  • Nano tank

    Noest.

Connections

Tap a linked problem for causes and a step-by-step fix.

Water fern in the wild

It is native to warm temperate and tropical parts of the Americas. It has been introduced widely elsewhere. It was first recorded in Europe in the 1870s-1880s. It was brought to Asia from East Germany in 1977 as a green manure for rice, in place of a cold-susceptible native Azolla. Where it has been introduced it grows fast, especially in nutrient-rich water, and outcompetes native water plants.

Water fern: planting and trimming

It needs no planting: it floats on the surface with its roots hanging below. Scatter a small portion on the water. Pieces break off and grow into new plants. It can also grow out of the water.

Water fern: why it melts or fades

It is not cold tolerant. In winter in temperate regions it dies back, surviving as submerged buds. Left unchecked, it dominates other plants in aquariums and ponds. Dense mats block light and can cause low oxygen as detritus decays.

Sources

  1. Aquatic Botany (Azolla and temperature)
  2. Flowgrow
  3. GBIF
  4. Wikipedia

est. marks an estimate or a figure only one source gives.

How we made this

Written with AI assistance from the sources listed here and checked against them (September 2026). Not yet reviewed by an expert. Report a mistake · How we write and check pages

Cite this page

Copy a ready-made line to credit this page in your own writing.

Citation

Scape Eden. “Water fern care: light, CO2 and placement”. Scape Eden aquarium wiki, updated October 4, 2026. https://scapeeden.com/wiki/plants/azolla-filiculoides

Reference style (APA)

Scape Eden. (2026, October 4). Water fern care: light, CO2 and placement. Scape Eden. https://scapeeden.com/wiki/plants/azolla-filiculoides

Plain link

https://scapeeden.com/wiki/plants/azolla-filiculoides

Text and data compiled by Scape Eden are free to reuse under CC BY 4.0 with attribution (credit Scape Eden and link to this page). Photos keep their own credited licences. Records are AI-assisted drafts with cited sources: see how we write and check this.